Mobotix D22 User Manual Page 76

  • Download
  • Add to my manuals
  • Print
  • Page
    / 113
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 75
3 OPERATING THE CAMERA
3.1 General Procedure
The MOBOTIX camera does not require any software installation; all you need is
your preferred browser with JavaScript support to operate the camera. Thus, the
MOBOTIX camera is supported by all common operating systems (such as Win-
dows, Macintosh and Linux, ...).
3.1.1 Establishing the Power Supply to the Camera
You can choose between the following options:
External power supply and Network Power Adapter (MX-NPA-3-RJ):
Power supply of one camera injected into the network cabling (max. length
100m (110yd)), from the NPA to the 10BaseT/NET connector of the camera
(see sections 3.3.3 and 3.3.4).
Network Power Box/Rack (MX-NPR-4, or 8/20): Power supply of 4/8/20
cameras injected into the network cabling (max. length 100m (110yd)), from
the NPR to the 10BaseT/NET connector of the camera (see section 3.3.5).
Power-over-Ethernet: Power supply using network components that are
conforming to the PoE standard IEEE 802.3af (see section 3.3.6)
3.1.2 Connecting the Camera
Ethernet interface of the camera (10/100 Mbps Ethernet): Connect directly
from a computer (using a crossover cable) or by using a Network Power
Adapter or a switch and a regular patch cable. Open a browser and enter
the IP address printed on the camera
label (e.g. 10.1.0.99).
If your computer is
not
in the same IP
address range as the camera
(10.x.x.x), you should install MxCon-
trolCenter (see section 3.4.6). Next, use
the integrated Zeroconf/Bonjour func-
tionality to establish a connection to the
camera. If this is not possible, you can
temporarily assign a matching IP
address to your computer (see section
3.4.1).
Once a connection has been established, click on the Admin Menu button to start
configuring the camera. The Admin Menu controls all network settings (IP address,
netmask, DHCP, etc.) and other options.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
74/104
D22M Camera Manual Part 1
MOBOTIX PoE products
do not require any fans
and are robust and reli-
able!
PoE components (IEEE
802.af) should not have
fans as this would de-
crease the overall reliabil-
ity of the entire system
Automatic camera search
using MxControlCenter
and Zeroconf/Bonjour
Page view 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 112 113

Comments to this Manuals

No comments