Mobotix T24S Technical Information download pdf (Page 58)

58/98

T24 System Manual Part2: Access Conﬁguration On The Keypad

www.mobotix.com • [email protected]

3.3 Managing Transponders

3.3.1 Add User Card (Individual Number Assignment)

You need the red admin card to set up a blue user card.

Proceed As Follows:

1. Specify the individually-selected personal, contact and/or

transponder numbers as required and immediately enter them

on your T24 User Data Record Card (see 3.2.2).

2. Enter Conﬁguration Mode: Press the OK/MENU button until

you hear the second beep (button ﬂashes blue).

3. Hold your admin card up to the keypad buttons until you hear a beep and the

OK/MENU button lights up blue continuously.

4. Enter Access Conﬁguration Mode: Brieﬂy press the blue key button, which then

lights up blue.

5. Enter Add Mode: Press the OK/MENU button until you hear the second beep

(button lights up blue).

6. Assign contact– method 1 (quick setup without contact number): Press the blue bell

button to enable the new card for checking and using the standard voice mailbox

directly via the keypad. If you wish to exclude the user card from voice mailbox interaction

via the keypad, do not press the bell button.

hold (2nd beep)

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 99 100

No comments

Mobotix T24S Technical Information Page 58