Mobotix D14D Service Manual download pdf (Page 118)

118/132

D14D Camera Manual: Operating The Camera

www.mobotix.com • [email protected]

• Activate event control and recording: By factory default, the MOBOTIX camera's

event control is disabled. Click on the Arm & Record button to activate event control.

This will activate video motion detection and recording. Cameras with integrated

ﬂash memory (MOBOTIX R models and models with SD card) will use the ﬂash

memory by default to store the image and video data (recording target). If desired,

you can set additional events and adjust the settings of the recording and storage

parameters (Setup Menu> Event Settings, Setup Menu> Recording and Admin

Menu> Recording to External File Server/ Flash Device).

=> (

Software Camera Manual Part 2

, Chapter 7 and Chapter 8)

• Set up actions/messaging: Upon detecting an event, the MOBOTIX camera can

trigger alarms. These alarms can be adjusted to your needs and you can assign

them to one or more events: playing back a sound alarm on the camera speaker,

showing the visual alarm in the camera live image, sending an e-mail or network

message with the alarm image, placing a phone call, uploading an alarm image

to an FTP server, switching a signal output line of the camera (e.g. for switching on

the lights/opening a door).

For the settings, see Setup Menu > Action Group Overview. The actions to be

performed are deﬁned and used in these action groups in the form of “action proﬁles”.

The dierent action proﬁles can also be deﬁned in the following areas: Admin Menu

in the Hardware Conﬁguration (proﬁles for signal output), Transfer Proﬁles (FTP, email,

network messages) and Sound and VoIP Telephony (sound proﬁles, VoIP proﬁles). For

more information, see the online help for the camera (see Section 3.7.11).

• Activate shock detector:The D14D is the ﬁrst MOBOTIX camera with a pre-installed

shock detector (for all IT and Secure versions). If, for example, the camera‘s housing

receives a blow, it automatically registers it and send a notiﬁcation via a network

message or telephone call. A general advantage is that MOBOTIX cameras are

extremely tough, not least because of the absence of mechanical moving parts. This

typically allows them to stay fully operational, in particular, when they are subject to

strong vibrations. Open the Setup Menu > Event Control > Environment Events > Edit

dialog box if you would like to activate the shock detector (and any other sensors).

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 133 134

No comments

Mobotix D14D Service Manual Page 118