Mobotix D22 User Manual download pdf (Page 68)

2.9 Mounting the D22M to a Wall Using the Wall Mount

Before mounting the MOBOTIX D22M-IT/Secure with the Wall Mount you need to

prepare the network connection and drill the holes for the fixtures:

• Network connection: The network cabling is supplied through the opening

in the back of the wall mount. The cabling is perfectly protected by the mount

and cannot be seen or damaged. The wall mount can be mounted directly

on top of wall outlets (flush-mounted or above-the-wall types; maximum

dimensions of the outlet: 88x 80mm (3.5x 3.2in) width x height).

Use the factory pre-installed network cable of the D22M (50cm (20in)

length). This will ensure that you can turn the lens unit of the D22M freely

later on.

• Drilling the holes: Prepare the holes in the wall. Make sure that you have the

supplied dowels ready for this purpose. Use the supplied drilling template for

the D22M Wall Mount (fold-out at the end of this manual) to mark the posi-

tion for drilling the dowel holes and the holes through which the cables will

be led later on.

Procedure

• Disengage the mounting ring from the

housing of the D22M-IT/Secure. This ring is

not required when mounting the camera to

the Wall Mount.

• Use the delivered screws to mount the

Wall Mount (without the camera) to the

wall (directly on top of the cabling or the wall

outlet).

www.mobotix.com • [email protected]

66/108

D22M Camera Manual Part 1

Find the folded drilling

template of the D22M

Wall Mount at the end of

the manual!

Maximum torque for all

screws is 1 to 1.2Nm

(0.74lbf ft)

Caution

Only use the factory pre-installed network cable of the MOBOTIX

camera. It is very important that the rubber plug of the network

cable reliably protects the housing from moisture entering the

camera. All openings of the camera housing need to be closed off

properly. This will ensure that the camera remains weatherproof.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 112 113

No comments

Mobotix D22 User Manual Page 68