Mobotix M15 Specifications download pdf (Page 94)

94/148

M15 Camera Manual: Operating The Camera

www.mobotix.com • [email protected]

3 OPERATING THE CAMERA

3.1 Manual and Automatic Operation– Overview

MOBOTIX cameras do not require any extra software. Thus, you can set up and operate the

MOBOTIX camera using a JavaScript-enabled browser on all common operating systems

(such as Windows, Linux, Apple, etc.). As an alternative, you can also use the MOBOTIX

applications MxControlCenter and MxEasy. Follow these steps to set up the camera:

1. Connect the camera to the network. Power is supplied directly via the Ethernet

cable (see

Section 2.7, «Network and Power Connection»

2. Set up the camera’s network parameters:

– Manually using a web browser (see

Section 3.2.1, «Manually Setting Up the

Network Parameters in a Browser»

and below)

– Automatically using MxControlCenter/MxEasy (see

Section 3.2.3

and

Section 3.2.4

) or via DHCP (see

Section 3.2.6, «Starting the Camera with an

Automatic IP Address (DHCP)»

)

3. Conﬁgure the camera using the web-based user interface, MxControlCenter

or MxEasy.

Every MOBOTIX camera comes preconﬁgured with a static IP address in the 10.x.x.x range

(for example, 10.8.0.99). However, local computer networks usually have IP addresses

in the 172 or 192 ranges. In order to access a MOBOTIX camera via the network, the camera

needs to obtain an IP address in the same address range. You can set up the network

parameters of the MOBOTIX camera using one of the following methods: Manually,

using MxCC and MxEasy or by DHCP.

Download the free-

of-charge MxEasy

and MxControlCenter

software at

www.mobotix.com

Camera software

in the browser

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 147 148

No comments

Mobotix M15 Specifications Page 94