Mobotix MX-KEYPAD1-EXT-SV Technical Information download pdf (Page 122)

122/148

T24 System Manual Part 1: Installation

www.mobotix.com • [email protected]

2.8.2 Conﬁguring The T24-DoorMaster

Before using the T24-DoorMaster, it is essential to conﬁgure the signal output option to

be used (see Section 2.5.2).

Three Options Are Available

Option 1: Power Supply From T24-DoorMaster Battery (Self-Powered)

The door opener is supplied with a pulsed 12 V voltage (max. 10 W) from the battery. This

state is signaled by a green LED in conﬁguration mode. As this is the factory default setting,

no further conﬁguration is required for this connection option.

Option 2: Power Supply From External Power Supply Unit (Internal Relay Function)

The relay integrated into the T24-DoorMaster switches an external voltage that powers the

connected door opener. This is signaled by a red LED in conﬁguration mode. Conﬁguration

is required here (see below).

Option 3: Self-Locking Mediator Door Lock Including UPS Via Battery Pack

A DC control signal is switched to the control input of the Mediator (special door opener

that keeps the door permanently locked). This is signaled by a blue LED in conﬁguration

mode. Conﬁguration is required here (see below).

D$<(?>"-$#$;

P2+*';*#; 7$#2&"'Q

K'+$#'*< #$<*4 (3'1+&"'

!$;&*+"#

LED (blue)

Door opener

and emergency

unlocking

(in the event of

a power failure)

Doorbell

LED (green, red)

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 149 150

No comments

Mobotix MX-KEYPAD1-EXT-SV Technical Information Page 122