Mobotix MX-KEYPAD1-EXT-SV Technical Information Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 150
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
6/148
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Important Notes
Electrical Installation
Electrical systems and equipment may only be set up, changed and maintained
by a qualified electrician or under the management and supervision of a qualified
electrician in accordance with electrotechnical regulations.
Legal Aspects Of Video And Audio Recording
When using MOBOTIX products, privacy and data protection regulations regarding
video and audio recording must be observed. Depending on the country and ins-
tallation site of the IP Video Door Station, the recording of video and audio data
may be subject to special constraints or may be prohibited. All users of MOBOTIX
products are therefore requested to inform themselves of and comply with all currently
applicable regulations. MOBOTIX AG will not assume any responsibility for product
use that does not comply with the local laws.
Network Security
MOBOTIX products combine all necessary configuration options for operating in
Ethernet networks in a manner that complies with data protection regulations. The
operator is responsible for the data protection concept across the entire system. The
necessary basic settings to prevent misuse can be configured in the software and
are password protected. This prevents unauthorized access by unknown parties.
Risk Of Overheating When Exposed To Direct Sunlight
When mounting black, dark gray or amber-colored T24 IP Video Door Stations in
locations where the device is exposed to direct sunlight, the housing temperature
can exceed the maximum allowed temperature limit.
This can result in electronic failures and
injuries especially when touching exterior
metal parts. If the intended use of the
device is at an (unprotected) outdoor
location, you should only install white
or silver-colored modules and frames.
Do Not Remove Lens Cover
The camera module of the door station may not be operated without the installed
transparent lens cover. The camera is no longer weather-proof when operated
without the lens cover; the removal of the cover exposes the metal ring around the
lens, which is especially prone to overheat in high temperatures. Therefore, anyone
who touches the ring with their bare hand is at risk of being burned.
§
T24 System Manual Part 1: Inhalt
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 149 150

Comments to this Manuals

No comments