69/148
Mounting The Frame And Housing
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Important: Pay Attention To The Position Of The Cables
When installing the door station, make sure that all the required cables (network, MxBus,
anti-theft protection and so on) are laid in such a way that they protrude from the wall
directly below the housing openings provided.
This particularly applies to the on-wall housing that has up to six cable guides (triple frame).
Only one cable (multi-wire cables may be used) should be inserted into each cable guide.
The cables should be long enough so that sucient cable reserves remain to allow easy
cabling within the housing (see Section 2.3.4).
Notes
• Position the housing in the center above the cables
• Only use one cable in each cable guide
• Make sure sucient cable reserves are provided
• Hint: If longer cable reserves are required, you can mount an additional
in-wall socket underneath the on-wall housing (see the dashed line in the
figure above).
Network cable
MxBus, anti-theft protection, etc.
Comments to this Manuals