Mobotix D22 User Manual Page 55

  • Download
  • Add to my manuals
  • Print
  • Page
    / 113
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 54
2.5.2 D22M-Basic
Before mounting the MOBOTIX D22M-Basic, you need to prepare the network
connection and drill the holes for the fixtures:
Network connection: The network cabling is supplied through the ceiling
directly above the camera. The cabling is perfectly protected and cannot be
seen or damaged. When preparing the installation, you should make sure
that the cable runs at least 15cm (6in) within the camera housing (excluding
the connector itself). This will ensure that you can turn the lens unit freely later
on.
Note: As an alternative, you can also connect the camera above a wall out-
let (either flush-mounted or on-wall types). Note, that the cabling remains
visible in this case. The D22M-Basic model cannot be mounted directly on
top of wall outlets.
Drilling the holes: Prepare the holes in the ceiling. Make sure that you have
the supplied dowels ready for this purpose. Use the supplied drilling tem-
plate for the D22M-Basic (fold-out at the end of this manual) to mark the
position for drilling the dowel holes and the holes through which the cables
will be led later on.
Procedure
Remove the camera dome. Take the deliv-
ered plastic foil or a cotton cloth and remove
the dome by turning it in counter-clockwise
direction.
Unplug the pre-installed network cable from
the network connector at the inside of the
camera. Make sure that you do not touch
any electronic parts insinde! Static electric-
ity could destroy these parts when touch-
ing them.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
53/108
D22M Camera Manual Part 1
Find the folded drilling
template of the D22M-
Basic at the end of the
manual!
Caution
Only use the factory pre-installed network cable of the MOBOTIX
camera. It is very important that the rubber plug of the network
cable reliably protects the housing from moisture entering the
camera. All openings of the camera housing need to be closed off
properly. This will ensure that the camera remains weatherproof.
Page view 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 112 113

Comments to this Manuals

No comments