Mobotix D22 User Manual download pdf (Page 59)

• Once you are seeing the desired image area,

tighten the Allen screws at the sides of the

lens unit (in clockwise direction) and the

toothed ring inside the camera. Do not use

excessive force when doing so to avoid dam-

aging the camera.

• Release the lens' lock ring and adjust the

image focus by turning the lens in its holder. Check the image on the com-

puter monitor. Make sure that you tighten the lock ring again once you are

finished. Never turn the lens to far into the lens mount and never apply

excessive force when doing so as this would damage the lens mount

otherwise.

Mounting the Dome and the Camera's Outer Shell

• Mount the dome. Take the delivered plastic

foil or a cotton cloth, insert the dome into its

seat and turn it in clockwise direction. You

should once again control the sharpness of

the camera image on a computer monitor.

If required, clean the lens gently using a lint-

free cotton cloth before installing the dome.

Do not apply excessive pressure onto the glass surface when cleaning the

lens!

• Mount the outer shell (IT/Secure models

only). Use the delivered Allen screws (or the

security screws and the spacers when

mounting the outer shell of the Vandalism

Set).

www.mobotix.com • [email protected]

57/108

D22M Camera Manual Part 1

Maximum torque for all

screws is 1 to 1.2Nm

(0.74lbf ft)

Lock ring: Secure the lens

against vibrations

Lenses are adjusted

manually

Maximum torque for all

screws is 1 to 1.2Nm

(0.74lbf ft)

Caution

Only use the factory pre-installed network cable of the MOBOTIX

camera. It is very important that the rubber plug of the network

cable reliably protects the housing from moisture entering the

camera. All openings of the camera housing need to be closed off

properly. This will ensure that the camera remains weatherproof.

Caution (only 135 mm Tele Lenses)

Image Focus: Due to the lens effect of the dome, the focus of the

135mm tele lens is shifting slightly once the dome has been mounted.

Before mounting the dome, the tele lens should be turned about 90°

in clockwise direction (as seen from the lens' front). Make sure that

you check the focus of the live image in your browser with the dome

installed and re-adjust the lens, if required.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 112 113

Comments to this Manuals

No comments

Mobotix D22 User Manual Page 59

Comments to this Manuals

Related products and manuals for Security cameras Mobotix D22