Mobotix MX-S14-OPT-MK-CW Service Manual download pdf (Page 64)

64/148

S14 Camera Manual: Installation

www.mobotix.com • [email protected]

2 INSTALLATION

The S14 FlexMount is designed for concealed installation in ceilings, walls, behind panels

or in existing or specially manufactured housings. The independent sensor models, each

with a max. 2m/6.6ft long cable, mean the S14D can oer a number of options when

selecting the installation location. The installation position of the sensor modules is crucial

here. The camera module itself can then be installed in an appropriate place on the wall

or ceiling (taking the maximum cable length to the sensor modules into account).

The following questions should be answered before mounting the MOBOTIX S14:

1. Where and how will the camera be mounted?

2. Where and how should the sensor modules be mounted?

3. What accessories might be needed?

4. How is the camera connected to the network and how is the power supplied?

5. How are the connections furnished from the building?

6. What cabling considerations are necessary?

The following sections in this chapter should answer all these questions. If anything is

unclear or you have more questions, please contact your MOBOTIX partner or MOBOTIX

Support directly. Contact information can be found at www.mobotix.com under Support.

2.1 Determining The Installation Position

The installation options indicated in both the following sections are examples of the most

common applications for a S14 FlexMount. Many other installation ideas (for example, with

customized lens units) can also be successfully implemented thanks to the robust weath-

erproof design (IP65) and compact shape of the sensor modules and the camera housing.

Please remember that:

1. The S14D sensor modules must always be mounted so as to avoid the constant

accumulation or any collection of water or other liquid around the cable connection

on the back of the housing. Otherwise this could lead to a build-up of condensation

inside the sensor module and its subsequent failure.

Unused connectors on the housing of the S14 must always be sealed using the plugs

installed as standard on delivery as well as the corresponding retainers.

Only original MOBOTIX cables should be used to connect the sensor modules, patch

cables and USB cables in order to guarantee weather resistance according to IP65.

The plugs supplied must be used if additional cables are required (MxBus, audio).

The lower (blue) part of the camera housing must face downwards so that any water

running o the housing cannot accumulate around the connectors.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 148 149

No comments

Mobotix MX-S14-OPT-MK-CW Service Manual Page 64