Mobotix MX-S14-OPT-MK-CW Service Manual download pdf (Page 90)

90/148

S14 Camera Manual: Installation

www.mobotix.com • [email protected]

2.5 Network And Power Connection, Additional Cables

2.5.1 Network Cabling For S14 With Patch Cables

Using a patch cable and an MX-Patch-Box or MX-NPA-Box oers the following advantages:

• Quick installation/deinstallation

• No shortening of the cable in the event of multiple installation/removal

• Hose-proof/dust-proof connection in accordance with IP65

Connecting The Patch Cable To The Camera

First remove the blue bayonet catch and the blue sealing

plug in the left-hand connector on the S14. Then insert the

MOBOTIX patch cable into the camera and secure the cable

using the bayonet catch.

Connecting The Patch Cable To An MX-Patch-Box, MX-NPA-Box or Standard

Network Port

First remove the blue bayonet catch and the blue sealing

plug in the right-hand connector on the box to establish the

network connection to an MX-Patch-Box or MX-NPA-Box.

Then insert the MOBOTIX patch cable into the box and secure

the cable using the bayonet catch.

More information on installing an

MX-Patch-Box

MX-NPA-

Box

is available at www.mobotix.com under Products>

Accessories> Functional Boxes.

Insert the MOBOTIX patch cable of the S14 into the network port for standard connections

(only permitted in indoor areas).

If additional cables are required inside the housing (MxBus, microphone, speaker), they

must be connected as described in

Section 2.5.3, «Connecting Additional Cables»

Patch cable

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 148 149

No comments

Mobotix MX-S14-OPT-MK-CW Service Manual Page 90