Mobotix MX-S14-OPT-MK-CW Service Manual Page 98
- Page / 149
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
98/148
S14 Camera Manual: Operating The Camera
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [email protected]
3 OPERATING THE CAMERA
3.1 Manual and Automatic Operation– Overview
MOBOTIX cameras do not require any extra software. Thus, you can set up and operate the
MOBOTIX camera using a JavaScript-enabled browser on all common operating systems
(such as Windows, Linux, Macintosh, etc.). As an alternative, you can also use the MOBOTIX
applications MxControlCenter and MxEasy. Follow these steps to set up the camera:
1.
Connect the camera to the network.Power is supplied directly via the Ethernet cable
(see
Chapter 2, «Installation»
)
2. Set up the camera’s network parameters:
–
Manually via a web browser (see
Section 3.2.1, «Manually Setting Up The Network
Parameters In A Browser»
and below)
–
Automatically with MxControlCenter/MxEasy (see
Section 3.2.3
and
Section 3.2.4
)
or via DHCP (see
Section 3.2.7, «Starting The Camera With An Automatic IP Address
(DHCP)»
)
3. Configure the camera using the web-based user interface, MxControlCenter
or MxEasy.
Every MOBOTIX camera comes preconfigured with a static IP address in the 10.x.x.x range
(for example, 10.8.0.99). However, local computer networks usually have IP addresses
in the 172 or 192 ranges. In order to access a MOBOTIX camera via the network, the camera
needs to obtain an IP address in the same address range. You can set up the network
parameters of the MOBOTIX camera using one of the following methods: Manually,
using MxCC and MxEasy or by DHCP.
Download the free-
of-charge MxEasy and
MxControlCenter soft-
ware at www.mobotix.com
Camera software
in the browser
- S14 Camera Manual 1
- S14 Camera Manual: Contents 2
- Contents 3
- CONTENTS 3
- S14D: Dual Camera System 7
- With Dual Imaging, Giving 7
- Up To 6 Megapixel Resolution 7
- S14M: Mono Camera System 7
- With Integrated Lens 7
- S14 Camera Manual: Foreword 8
- 180° panorama 9
- 1,536 lines 10
- 576 lines 10
- 288 lines 10
- 960 lines 10
- MOBOTIX System 11
- L11 (fisheye) 12
- Hemispheric 12
- Hemispheric 180° panorama 13
- Virtual PTZ 1 Virtual PTZ 2 15
- SUPERIOR STORAGE SOLUTION 16
- Backup copy 17
- Disruption in the connection 17
- Secure in case of failure 17
- ADDED SECURITY VALUE 18
- Ethernet patch cable 25
- PoE switch 25
- 2m/6.6ft cable 25
- 1.2 Hemispheric Image Views 26
- Hemispheric Image Views 27
- Full Image And Normal View 30
- Flexible And Futureproof 33
- External USB storage: 35
- Lower maximum data rate 35
- Software Update» 39
- Software 39
- 1.5 Lens Options 40
- Lens Options 41
- 1.8 Technical Data 44
- Technical Data 45
- Installation Accessories 47
- Attaching The Base Module 50
- M6 tap holes 50
- 33.5mm/1.32in 51
- Sensor module 52
- Front View Of Sensor Module 53
- Rear View Of Sensor Module 53
- Installation accessories 55
- Attaching The Camera Housing 58
- M6 tapped slots 58
- 39.5mm/1.56in 59
- 48mm/1.89in 59
- 1.10 Available Accessories 60
- Available Accessories 61
- 1.10.9 MX-NPA-Box 62
- 1.10.10 MX-GPS-Box 62
- 1.10.11 MX-232-IO-Box 62
- 2 INSTALLATION 64
- Original full image 66
- (ceiling installation in 66
- Identification Perception 68
- Diam. 50mm/2in* 73
- Diam. 45mm/1.77in 73
- SurroundMount 73
- Indoors Outdoors 74
- Note on Installation Frame* 75
- 2.2 Before Mounting 76
- Before Mounting 77
- Installation cable 80
- Further cables 80
- Sensor cable 80
- MiniUSB cable 80
- Installing The S14D FlexMount 85
- Section 2.5 88
- Installing The S14M FlexMount 89
- MX-Patch-Box 90
- Attach the cable ties 91
- Secure the cable 91
- Connecting the cable wires 92
- Additional cables 93
- (MxBus, microphone, speaker) 93
- Mic Speaker MxBus 93
- 2.5.4 PoE Variables 94
- PoE adapter 95
- 3 OPERATING THE CAMERA 98
- A Browser» 99
- Section 3.2.2, «First 99
- Settings In The Browser» 99
- Section 3.2.3 100
- Section 3.2.4 100
- Section 2.5.8 102
- User name: admin 103
- Defaultuserdata 103
- Softbuttons 104
- Camera views 104
- Quick controls 104
- Camera status and help 104
- ”Camera Screens In The 105
- Browser” 105
- Camera Software Manual Part 2 105
- MxControlCenter 106
- Video Source > Add 107
- Video sources 107
- «Creating A New Layout» 108
- ”Reconfiguring 111
- *Bonjour: automatic 112
- Ceiling, Wall, Floor 113
- Panorama, Surround, etc 113
- In case of an error 115
- Setup Menu> vPTZ Settings 116
- 3.3.2 Full Image Recording 118
- Q24M Hemispheric 121
- Section 3.2 121
- High-resolution 180° panorama 122
- Lock open 123
- Click on the icon 123
- Camera live image with 123
- OnScreen Control visible 123
- Section 3.3.1 125
- Caution: No OnScreen 126
- Control is available in 126
- ”Double Panorama” mode 126
- Panorama/Focus 127
- Full Image 127
- Replacement of sensor modules 128
- 3.4 MicroSD Card Recording 130
- MicroSD Card Recording 131
- 3.4.4 Accessing Camera Data 134
- 3.5.1 Overview 136
- Configuration In The Browser 137
- Software Camera Manual Part 2 138
- Chapter 7 138
- Chapter 8 138
- Section 3.6.12, «Online 138
- Help In The Browser» 138
- 3.6 Additional Notes 140
- Additional Notes 141
- 3.6.9 Browser 142
- 3.6.11 Safety Warnings 142
- 3.6.15 Disclaimer 144
- S14 FlexMount Camera 146
- S14D and S14M 149
© 2020, manymanuals.com. All rights reserved. | 0.307 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals