68/148
S14 Camera Manual: Installation
© MOBOTIX AG • Security Vision Systems • Made in Germany
Selecting An Appropriate Camera Position
During installation, ensure that the camera is focused on the most important areas of the
room as directly as possible in order to provide the desired level of detail recognition
(camera focus). The S14 should be installed on a wall such that the two arrows on the
back of the sensor module housing (S14D) or the rounded side of the camera housing
(S14M) are pointing towards the ceiling.
To install the sensor module on thicker walls or with the 15° wedge (see next section),
the MOBOTIX oers an extension that is attached to the sensor module at the back and
secured with a bayonet catch.
1.50m/5ft
3m/10ft
2.50 to 3.50m/8.2 to 11.5ft
5m/16.4ft
Camera focus (best image quality) – standard installation
Identification Perception
2.50 to 3.50m/8.2 to 11.5ft
Mounting in the middle of the wall
Mounting the camera in
the middle of the wall
Comments to this Manuals