Mobotix M10 User Manual download pdf (Page 37)

Reset configuration to factory

defaults

It is possible to reset the camera's current configuration to the factory

default settings. After doing so, you need to save the configuration to

permanent storage and reboot the camera.

Attention: This will overwrite any modifications of the network settings.

Make sure that the camera can still be accessed.

Note: The current configuration can be replaced as a

whole or in parts (see Keep Parts of the

Configuration).

Save current configuration to

local computer

With this function, you can create a backup copy of the current

configuration on your local computer. Note, that FTP passwords etc. are

readable in the file.

Load a configuration from local

computer

Using this function, you can load a locally stored backup copy of the

configuration into your camera. After doing so, you need to save the

configuration to permanent storage and reboot the camera.

In order to be accepted, the file originally must have been created by

this camera.

Note: The current configuration can be replaced as a

whole or in parts (see Keep Parts of the

Configuration).

Edit configuration file (for

experts)

It is possible to modify parameters directly in the configuration file. It is

recommended that only experts make use of this possibility. An

invalid modification of parameters may render the camera inaccessible.

Save the modified configuration in the permanent storage and reboot

the camera.

10.4 Keeping Parts of the Configuration

Usually, when loading a backup copy from your local computer or when resetting the configuration to the

factory default settings, the entire configuration is replaced.

In order to keep parts of the configuration (e.g. user and password settings), you need to check the everything

except the parts checked belowoption in the Replace list. Check the configuration sections that are not to be

replaced.

Next, click on Load in the Load Configuration From File dialog, or click on Restore in the Restore

Configuration From Flash dialog, to replace the complete configuration or parts of it in the current camera

configuration.

Note: Remember, that the changes to the configuration still apply only to the current camera

settings. If you reboot now, the old configuration will be used if you do not store the

current configuration to the permanent (flash) storage of the camera.

10 Configuring the Camera 28

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 194 195

Comments to this Manuals

No comments

Mobotix M10 User Manual Page 37

Comments to this Manuals

Related products and manuals for Security cameras Mobotix M10