Mobotix D24M-Sec User Manual Page 65

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 64
65/148
D24M Camera Manual: INSTALLATION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
6. Remove the mounting ring: Separate the black mount-
ing ring from the camera housing (lift the spring clip).
This ring is not required when mounting the camera to
the On-Wall Set.
7.
Connect the cable: Connect the on-site network cable
to the network cable passing through the On-Wall Set
using a standard connector. Make sure to leave enough
unused cable inside the housing. This will ensure that
you can turn and tilt the lens mount freely later on. Excess
cable can be easily stored within the On-Wall Mount.
8.
Attach the camera to the mount: Press the D24M so that
it is seated firmly within the On-Wall Mount. The tapered
guides at the back of the D24M housing fit exactly into
the openings of the On-Wall Mount. Attach the white
outer shell with the supplied Allen screws (without rubber
seal) once the lens has been adjusted.
9.
Proceed to Section 2.11, Aiming And Adjusting The Lens.
Page view 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 147 148

Comments to this Manuals

No comments