Mobotix D24M-Sec User Manual download pdf (Page 66)

66/148

D24M Camera Manual: INSTALLATION

www.mobotix.com • [email protected]

2.7 Mounting The Camera With The In-Ceiling Set

2.7.1 Mounting Instructions

The In-Ceiling Set oers the most stylish installation option for the D24M. When properly

installed, the only visible component is a particularly sleek and discreet dome camera,

while most of the remaining components are concealed inside the ceiling. Only the compact

dome and the thin decorative ring that conceals the screws can be seen.

For these reasons, the D24M installed with the In-Ceiling Set is the preferred option for

most indoor spaces frequented by customers or the general public (e.g. hotels, restaurants,

banks, retail stores, public buildings, etc.).

The common use of suspended ceilings in commercial and public buildings is an additional

reason to place a preference on in-ceiling installation. The installation process is also

simpliﬁed, as the network cable may be laid without diculty and only a 15 cm diameter

hole must be cut in the ceiling or ceiling component.

Before installing the MOBOTIX D24M (IT/Secure) on an indoor ceiling with the In-Ceiling

Set, you must prepare the network connection and drill a hole for the camera:

• Network connection: The network cable is fed through the ceiling directly above

the camera. When preparing the installation, make sure that about 15cm of cable

remains unused.

• Cut a hole for installation: The hole should have a diameter of 150mm (see drilling

template at the end of the manual).

The white decorative

ring is also available

in stainless steel

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 147 148

No comments

Mobotix D24M-Sec User Manual Page 66