• Remove the rubber plug from the blue cable guide beneath the left side
of the cable cover and store the plug in a safe place.
If you are only using one cable later on, close
the unused cable guide again using this
plug. This will ensure that the camera
remains weatherproof (IP65), even if it has
only one cable.
• Insert the cable into the cable guide.
• If you are using both connectors, the two
cables should cross one another in front of
the connectors.
• Push the cable cover (item7) back into its
seat and fasten the two Allen screws M4x25.
When attaching the cable cover, take care to
properly align the cover with the seal of the
camera casing and the two cable guides.
This will ensure that the camera remains
weatherproof (IP65).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
43/96
D12 Camera Manual Part 1
If you are only using one
cable, close the unused
cable guide with one of
the supplied plugs
Example:
Yellow: Ethernet
Green: ISDN
Always mount the cable
cover (IP65)!
Comments to this Manuals