Mobotix D12 Technical Information download pdf (Page 67)

The configuration follows these five general steps:

a) Establish the first connection (Ethernet or ISDN).

b) Set the parameters for the desired connection type (Ethernet/ISDN) using the

Quick Installation.

c) Set the event control (events, actions and messages); see chapter 7,

Events,

Actions and Messages

, in the

Software Manual

d) Set the storage parameters (FTP, internal and external ring buffer storage).

e) Store the configuration in the camera's permanent storage (flash).

www.mobotix.com • [email protected] • 23.11.2006

65/96

D12 Camera Manual Part 1

Always use Quick Instal-

lation for initial configu-

ration

Note

After first booting the new MOBOTIX camera or after resetting to facto-

ry defaults, accessing the Administration menu (Admin Menu button)

will automatically start the Quick Installation wizard. This is where you

configure the most important camera parameters in a step-by-step

manner. If you have completed the Quick Installation wizard at least

once, the standard Administration menu will open when you click on

the Admin Menu button.

Live image: http://preparkcam.mobotixserver.de

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 99 100

No comments

Mobotix D12 Technical Information Page 67