2.9.3 Attaching the Camera's Outer Shell
Once the wall mount and the camera have been assembled, it's time to attach the
outer shell:
• Only attach the outer shell once you have finished setting the lenses' focus
and mounted the camera dome.
• Hold the outer shell so that the round hole of the shell is positioned over the
PIR sensor of the camera. Gently press the shell into the shell's seats in the
camera casing.
For additional information on this topic, see section 2.10,
Assembling and
Disassembling the Camera
.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
54/96
D12 Camera Manual Part 1
The outer shell snaps into
its seats at the camera
casing by pressing gently
down on the ring
Dismount the outer shell
using the supplied custom
tool (see section 2.8,
Assembling and
Disassembling the
Camera
).
Caution
The MOBOTIX D12D-Outdoor is only weatherproof if the camera
casing has been mounted tightly to the bottom plate and both the
camera dome and the outer shell are properly seated.
Comments to this Manuals