Mobotix D12 Technical Information download pdf (Page 77)

100

Make sure that no other network device uses the camera's IP address:

• Open a command shell (Windows) or a terminal (Linux/UNIX/OSX) and enter

the following command:

ping <factory IP address>

If you receive an answer from another network device although the camera is not

connected, you will have to remove that device until you have reset the MOBOTIX

camera to a free IP address. We recommend using the Quick Installation wizard for

this task.

If your computer does not use an IP address in the 10.0.0.0 network (e.g. a

192.168.x.x or 172.x.x.x network), you should temporarily set a new IP address

in the 10.x.x.x range:

Windows 2000/XP

(1) Open the Network Con-

nections and open the

Properties of LAN Con-

nection.

(2) Double-click Internet

Protocol (TCP/IP).

(3) On the General tab, acti-

vate the Use the follo-

wing address option.

(4) Enter an IP address (e.g.

10.1.0.11) in the class

A network (10.x.x.x) that

is unique in your network

and that is not the same

as the camera's IP

address.

(5) Close all dialogs by

clicking on OK.

Linux/UNIX/OSX

(1) Open a terminal as root user and enter the following command (eth0

usually is the first network interface):

ifconfig eth0:1 10.1.0.11

The computer now has the additional IP address 10.1.0.11, allowing it to

access the camera with its factory IP address in the 10.x.x.x network (10.1.0.99

in this example).

www.mobotix.com • [email protected] • 23.11.2006

75/96

D12 Camera Manual Part 1

The factory IP address is

printed on the sticker on

the camera housing

Example: 10.1.0.99

Make sure that you use

the IP address of your ca-

mera instead of 10.1.0.99!

Setting up an IP address

on Windows computers

Setting up a second IP

address on Linux/UNIX

computers

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 99 100

Comments to this Manuals

No comments

Mobotix D12 Technical Information Page 77

Comments to this Manuals