1.6.4 Starting the Camera Using the Factory IP Address
If the camera's IP address is not known any more, you can start the camera with its
factory IP address. Section 3.6,
Starting the Camera Using the Factory IP Address
,
describes this procedure in more detail.
1.6.5 Resetting the Camera to Factory Defaults
All settings of the MOBOTIX camera can be reset permanently to the factory default
settings. This makes sense if you have, for example, obtained a camera without
any information or you would like to reset all settings after testing the camera. In
order to perform this procedure, you need to have access to the administration
area of the camera (admins group). Open Admin Menu> Reset … to reset the
camera to factory defaults.
Note: In contrast to the method described in section 1.5.4,
Starting the Camera
Using the Factory IP Address
, all users (except the admin user) will be deleted
when resetting the camera to factory defaults. Likewise, the admin user's pass-
word will be reset.
1.6.6 Activating Event Control for Security Applications
In its default state, the camera's event control and video motion detection features
are not enabled. In order to activate event control as a whole, open Setup
Menu> General Event Settings and activate the Arming switch or click on the
Arm& Record softbutton of the browser interface. The video motion detection
window is visible again (dotted frame in the center of the live image) and the
camera stores images as soon as the video motion window detects movements.
1.6.7 Deactivating Text and Logo Options
As the camera arming has been deactivated as per factory default (see preceding
section), the MOBOTIX camera only displays the text WWW.MOBOTIX.COM, the
time stamp and the MOBOTIX logo at the top of the image. Once the camera
arming has been activated, the texts at the bottom of the live image (event, action
and messaging symbols) will also appear.
If the camera is armed, you can deactivate the status text at the bottom and the
text at the top left corner of the live image by setting Text Display in the Setup
Menu> Text & Display Settings dialog to
Off
. Setting Text Display to
Date & Time
will only display the time stamp in the live image. In order to hide the logo in the
live image, open Admin Menu> Logo Profiles and set Logo Display to
Disable
.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
23/96
D12 Camera Manual Part 1
The configuration can also
be reset partially
If the dotted rectangle in
the live image is visible,
the camera is armed
Text and logos can be also
deactivated or customized
to your liking
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals