2.4.3 Installation Using the Outdoor Wall Mount
The lenses play a very important role when determining the correct position for the
camera. In order to find the proper lenses for your application, you should consult
the lens table available on www.mobotix.com in the Products>Lens Options
section.
The exact positioning of the camera casing itself is largely dependent on the area
that the camera's PIR sensor should cover. The exact angles should also be taken
from the lens table.
Once you have finished these preparatory tasks, you should consider a test
installation (camera mounted temporarily to the wall mount and connected to a
laptop) in order to find the best position for the camera.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
33/96
D12 Camera Manual Part 1
Caution: Notch for
preventing damage from
condensation
PIR specs:
Range about 10 m
Field of view of approx. +/-
15°
Note
The following is recommended for all D12
Outdoor models used outdoors or
indoors with high variations in
temperature: cut the outer sealing with a
sharp knife (as shown in the figure) in
order to prevent condensation from
accumulating.
The notch should be 3 mm wide (as wide
as the Allen wrench) and should point
downwards when the camera is
installed.
Comments to this Manuals