2.9 Completing the Installation
2.9.1 Establishing a Connection to the Camera
Establish a connection to the camera as described in section 3.4,
Establishing a
Connection to the Camera
.
2.9.2 Adjusting the Lenses, Visual Check
Make sure that you see the live image of the camera on the monitor of your
computer or laptop. Now adjust the lenses one by one until you see the desired
image area on your monitor:
• Remove the camera dome using a lint-free cotton cloth.
• Release the lens' lock ring, adjust the image focus and tighten
the lock ring again.
• Make sure that the lenses' ribbon cables are properly secured.
• Make sure that the cable clamps are properly seated. This will
prevent the cable clamps from falling into the dome and
obscuring parts of the image once the camera has been mounted.
• Attach the dome using the cotton cloth (see section 2.10.1,
Assembling the
Camera
, item(4)) and finally check the focus of the lenses on the monitor.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
53/96
D12 Camera Manual Part 1
Lock ring: Secure lenses
against vibrations
Lenses are adjusted
manually
Caution (tele lens only)
Scharfstellung: Durch den Linseneffekt der Domkuppel verändert sich
der Scharfstellpunkt (Fokussierung) der Teleobjektive leicht.
Drehen Sie daher vor Montage der Domkuppel das Teleobjektiv um ca.
90° im Uhrzeigersinn (gesehen in Objektiv-Einschraubrichtung).
Kontrollieren Sie abschließend die Bildschärfe des Livebildes bei mon-
tierter Domkuppel und korrigieren Sie gegebenenfalls die Scharfstel-
lung erneut.
Tighten the dome by
turning clockwise
Comments to this Manuals