3.2 Overview of the Configuration Settingss
• Using the Quick Installation wizard
After first booting the camera or after resetting it to factory defaults, any ac-
cess to the administration menu (Admin Menu button) will start the Quick
Installation.
This wizard will guide you through the most important settings of the camera
(configuration of the network interface, image control, etc.) and can also be
used to reset the camera to its factory settings.
It is also recommended to use Admin Menu> Quick Installation later on as
well, e.g. if you would like to change connection parameters or add a new
connection type.
• Administration and setup of the camera
Basic configuration tasks of the camera (e.g. passwords, interfaces, software
updates) are carried out from the administration menu (Admin Menu button)
which requires the corresponding access rights (
admins
group).
Open the Setup Menu (button) and find the dialogs for changing the image,
event and recording settings in the Image Control and Event Control secti-
ons. These options are also available for users belonging to the
users
group.
Some of these settings can be changed using the corresponding pull-down
menus above the image on the Live screen.
• The image settings are already optimized
The factory image settings of MOBOTIX cameras deliver excellent images for
most application scenarios and should not be changed. If you do wish to
make changes, your changes should be minor and gradual. If you would like
to reset changes without resetting the complete configuration to factory de-
faults, you can use the Factory button at the bottom of the dialog to reset
only this dialog's settings. If you would like to reset all image settings, you
may do so using the Manage Settings> Restore Image Settings pull-down
menu above the image on the Live screen.
• All changes are temporary
All changes to the configuration are only temporary and can thus be tested
easily. Restoring the old configuration settings can be achieved using the
Restore button in most dialogs or by running Admin Menu> Restore last
stored configuration from flash (see also section 5.9,
Managing Settings
, in
the
Software Manual
).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
66/96
D12 Camera Manual Part 1
Always use Quick Instal-
lation for initial configu-
ration:
Admin Menu> Quick In-
stallation
User: admin
Password: meinsm
Setup Menu
Recommendation:
Always use factory image
settings!
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals