3.4 The First Image from the Camera
As soon as the Ethernet connection (see section 3.4.1,
Preparing the Ethernet Con-
nection
) or the ISDN connection (see section 3.4.2,
Preparing the ISDN Connection
)
has been established, you have the following possibilities to get the first image
from the camera:
• Direct access using a browser (section 3.4.4,
The First Image in the Browser
)
• Display the camera using MxViewer (free Windows client for MOBOTIX ca-
meras; section 3.4.7,
The First Image in MxViewer
)
Open the browser-based user interface of the camera to complete the re-
maining configuration tasks (see section 4.3,
The Live Screen in the Browser
,
in the
Software Manual
).
3.4.1 Preparing the Ethernet Connection
For this example, we will use a camera with the factory IP address 10.1.0.99.
Replace this IP address with the IP address of your camera. You will find this
address on a small sticker on the camera. Accessing the camera is always the
same and is independent of the connection type: simply enter the camera's IP
address in the address field of the browser (see section 3.4.4,
The First Image in
the Browser
).
Your computer has to have a network or a wireless interface, and it should be in
the same subnet as the camera. If your n etwork also uses IP addresses of a class
A network (e.g. 10.x.x.x, network mask 255.0.0.0), you should be able to
access the camera directly (provided no other network device uses the same IP
address).
Determine the IP address of your computer:
• Open a command shell
(Windows) or a terminal
(Linux/UNIX/OSX) and enter
the following command:
Windows 2000/XP: ipconfig
Linux/UNIX/OSX
: ifconfig
You will find the IP address of your Windows computer under IP address; for Linux/
UNIX/OS X computers, search for the inet address parameter of the eth0 device
(the first network interface). If your computer does not use an IP address in the
10.x.x.x range, you should change the network configuration of your computer or
add a new IP address (see below).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
74/96
D12 Camera Manual Part 1
Working with the web-
based user interface only
requires a web browser
with activated JavaScript!
Caution:
Netmask 255.0.0.0
Open a Command Prompt
(Windows):
Start> Run, enter "cmd",
then press [Return]
Hinweis
Sie können die Ansage der IP-Adresse der Kamera abrufen, indem
Sie den Taster " L " mit der magnetischen Seite des Spezialwerkzeugs
kurz betätigen.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals